Fuel Gauge Indicator; Low Fuel Warning Light; Coolant Temperature Gauge - Kubota SSV65 Operator's Manual

INSTRUMENT PANEL

1. Fuel gauge indicator

With the starter key at the [RUN] position, the fuel-
gauge-indicator indicates that the fuel remains in the
fuel tank.
WARNING
To avoid personal injury or death:
• Before adding fuel, be sure to stop the engine.
• Be sure to keep open flame away from the
machine. Otherwise a fire may result.
• Make sure that
grounded.
IMPORTANT :
• If the fuel-gauge-indicator is near the [E], add
the fuel as soon as possible. If the fuel-gauge-
indicator is near [E] and the machine runs on a
slope, the engine may run out of the fuel and
get interrupted.
• Be very attentive to the remaining fuel for the
engine not to stall. If the engine stalls, it may
fail to get restarted for a while to protect the
emission-purifying-device.
(1) Fuel gauge indicator
If the fuel runs short, open the rear door and the cap,
and refuel the tank.
(1) Cap
SSV65,SSV75
fuel delivery system
(A) Full
(B) Empty
NOTE :
• If the rear door can not be opened, open the
tank cap cover and the cap, and refuel the tank.
is
(1) Tank cap cover

2. Low fuel warning light

If the fuel in the tank goes below the prescribed level,
the low-fuel-warning-light will flash.
If the low-fuel-warning-light
operation of the machine, refuel as soon as possible.
(1) Low fuel warning light

3. Coolant temperature gauge

WARNING
To avoid personal injury or death:
• Do not open the radiator cap during or just after
operation. Hot coolant may gush out and scald
you. Wait for the coolant to cool down before
opening the cap.
With the starter key at the [RUN] position, the coolant-
temperature-gauge indicates the coolant temperature.
If engine coolant rises above a specified temperature
level, the indicator starts blinking and the buzzer beeps
once for advance warning. If the coolant temperature
further rises to the critical level, the blinking intervals
INSTRUMENT PANEL AND SWITCH
(A) Open
should flash during
29