Aux Port Switch; Aux Port Switch [High-Flow Model Only]; Aux Port Variable Switch; Aux Hold Switch - Kubota SSV65 Operator's Manual

SWITCHES

10. AUX port switch

The AUX-port-switch is used to enable the AUX port.
The AUX-port-switch can be used only when the AUX-
port-variable-switch on the right-control-lever is in the
neutral position.
1. When pressing the AUX-port-switch once, the AUX
port is unlocked and the
panel lights up.
2. When pressing the AUX-port-switch again, the AUX
port then gets locked.
(1) AUX port switch
11. AUX port switch [High-Flow
model only]
This switch is used to enable the AUX port and also to
enable the High-Flow mode.
WARNING
[High-Flow model only]
To avoid personal injury or death:
• Be careful not
incompatible attachment
mode. Otherwise the attachment may be
damaged.
Engaging and disengaging the AUX hydraulic low-
flow mode system
To engage:
Press the side of the AUX-port-switch one time. The
AUX hydraulic low-flow port turns on and the
on the instrument panel will appear.
To disengage:
Press the side of the AUX-port-switch again. The
AUX hydraulic low-flow port turns off and the
on the instrument panel goes out.
Engaging the AUX hydraulic high-flow mode
system
SSV65,SSV75
mark on the instrument
(2) AUX operation indicator
to use any high-flow-
in the High-Flow
symbol
symbol
INSTRUMENT PANEL AND SWITCH
To engage:
Press the side of the AUX-port-switch one time. The
AUX hydraulic low-flow port turns on and the
on the instrument panel will appear.
To disengage:
Press the side of the AUX-port-switch again. The
AUX hydraulic low-flow port turns off and the
on the instrument panel goes out.
(1) AUX port switch [High-Flow
model only]

12. AUX port variable switch

With the AUX port unlocked, the flow rate of the
hydraulic oil varies depending on the tilt angle of the
AUX-port-variable-switch.
• Right-hand control
The flow rate of the hydraulic oil through the right-
hand port (male) varies.
• Left-hand control
The flow rate through the left-hand port (female)
varies.
(1) AUX port variable switch

13. AUX hold switch

By pressing the right or left AUX-hold-switch, the flow
rate of the hydraulic oil is maximized.
symbol
symbol
(2) AUX operation indicator
37