List Of The Error Code Numbers - Kubota SSV65 Operator's Manual

LIST OF THE ERROR CODE NUMBERS

LIST OF THE ERROR CODE NUMBERS
◎: Sure to happen
○: May happen
Error Code
Problem or Failure
Number
E:001 CAN communication
Hydraulic oil temperature
E:004
advance warning
Hydraulic oil temperature
E:005 has reached a specified
level.
E:008 Fuel sensor system
E:009 Acceleration system
High-speed switching sys-
E:010
tem
E:011 Parking brake system
E:014 High-flow system
Hydraulic quick-hitch sys-
E:015
tem
Auxiliary hydraulic control
E:016 system (Control switch on
the knob)
Auxiliary hydraulic control
E:018 system (Solenoid valve for
Rightward SW)
SSV65,SSV75
Machine condition
Engine performance
Accelera- Engine out- Engine
tion limited put limited stopped
- -
- -
◎
-
- -
◎
-
- -
- -
- -
- -
- -
- -
Machine performance
- -
- -
- -
The fuel level indicator does
not appear on the meter. The
-
other functions of the ma-
chine are still operative.
The accelerator fails, but the
other functions of the ma-
- chine are still operative. The
machine is operative at the
low idling rpm.
The machine still runs at low
speed without switching to
- high speed.
The other functions of the
machine are still operative.
- The machine fails to move.
The high-flow system is not
turned on.
-
The other functions of the
machine are still operative.
The hydraulic quick-hitch sys-
tem is not turned on.
-
The other functions of the
machine are still operative.
The auxiliary-hydraulic-con-
trol-system is not turned on.
-
The other functions of the
machine are still operative.
The auxiliary-hydraulic-con-
trol-system is not turned on.
-
The other functions of the
machine are still operative.
TROUBLESHOOTING
Provisional measure and
Correction
Immediately contact your lo-
cal dealer.
Stop the engine and check
the level in the hydraulic oil
tank, for a hydraulic oil leak
and grill or oil cooler is clog-
ged.
Fill to proper level.
Stop the engine and check
the level in the hydraulic-oil-
tank and for a hydraulic oil
leak.
Fill the hydraulic-oil-tank with
the hydraulic oil to proper lev-
el.
If the error code number
still appears,immedi-
"E:005"
ately contact your local deal-
er.
Immediately contact your lo-
cal dealer.
Move the machine to a place
suited for repair. Immediately
contact your local dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Raise the hydraulic oil tem-
perature. Then if the error
code number is not
"E:014"
solved, immediately contact
your local dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
Immediately contact your lo-
cal dealer.
(Continued)
113