Alg Settings - NetComm NP740n User Manual

3-2-6 ALG Settings

Application Layer Gateway (ALG) is a special function of this router. It includes many preset routing rules for
numerous applications which require special support. With these supports, those applications which required
special support will be able to work with NAT architecture.
Please click 'NAT' menu on the left of web management interface, then click 'ALG Settings', and the following
message will be displayed on your web browser:
There are many applications listed here. Please check the box of the special support for applications you
need, and then click 'Apply' button, and the following message will be displayed on your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'
to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.
NP740N 11n Wireless Router
4
YML887
www.netcomm.com.au