NetComm NP740n User Manual page 49

Here are descriptions of every setup items:
Fragment: Set the Fragment threshold of wireless radio.
Threshold:
Do not modify default value if you don't know what it is, default value is 2346.
RTS Threshold:
Set the RTS threshold of wireless radio. Do not modify default value if you don't know what it is,
default value is 2347.
Beacon Interval:
Set the beacon interval of wireless radio. Do not modify default value if you don't know what it is,
default value is 100.
DTIM Period: Set the DTIM period of wireless radio. Do not modify default value if you don't know what it is, default
value is 3.
Data Rate:
Set the wireless data transfer rate to a certain value. Since most of wireless devices will negotiate with
each other and pick a proper data transfer rate automatically, it's not necessary to change this value
unless you know what will happen after modification.
N Data Rate:
Same as above, but only for 802.11n clients.
Channel Width:
Set channel width of wireless radio. Do not modify default value if you don't know what it is, default
setting is 'Auto 20/40 MHz'.
Preamble Type:
Set the type of preamble of wireless radio, Do not modify default value if you don't know what it is,
default setting is 'Short Preamble'.
Broadcast ESSID: Decide if the wireless router will broadcast its own ESSID or not. You can hide the ESSID of your
wireless router (set the option to 'Disable'), so only people those who know the ESSID of your wireless
router can get connected.
CTS Protect:
Enabling this setting will reduce the chance of radio signal collisions between 802.11b and 802.11g
wireless access points. It's recommended to set this option to 'Auto' or 'Always'. However, if you set to
'None', your wireless router should be able to work fine, too.
Tx Power:
You can set the output power of wireless radio. Unless you're using this wireless router in a really
big space, you may not have to set output power to 100%. This will enhance security (malicious /
unknown users in distance will not be able to reach your wireless router).
Turbo Mode:
Enhance the data transfer rate of LAN (up to 35Mbps, only for 11g), default value is 'Enable', it's
recommended to set this option to 'Enable'.
WMM: The short of Wi-Fi MultiMedia, it will enhance the data transfer performance of multimedia contents
when they're being transferred over wireless network. If you don't know what it is / not sure if you
need it, it's safe to set this option to 'Enable', however, default value is 'Disable'.
After you finish these wireless settings, please click 'Apply' button, button, and the following message will be
displayed on your web browser:
Please click 'Continue' to back to previous setup menu; to continue on router setup, or click 'Apply' to reboot
the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).
YML887
www.netcomm.com.au
NP740N 11n Wireless Router NP740N 11n Wireless Router NP740N 11n Wireless Router
4