Firewall - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

3-3 Firewall

Excepting NAT, this router also provides firewall function to block malicious intruders from accessing your

computers on local network. These functions include inbound attack prevention, and block outbound traffics,

like block URLs which have pre-defined keywords.

Please follow the following instructions to enable or disable firewall function:

Please click 'Firewall' menu on the left of web management interface, and the following message will be

displayed on your web browser:

Please select 'Enable' or 'Disable' to enable or disable firewall function of this router, the click 'Apply' button,

and the following message will be displayed on your web browser:

Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'

to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents