Add A New Qos Rule - NetComm NP740n User Manual

3-1-2 Add a new QoS rule

After you click 'Add' button in QoS menu, the following message will appear:
Here are descriptions of every setup items:
Rule Name:
Please give a name to this QoS rule (up to 15 alphanumerical characters)
Bandwidth:
Set the bandwidth limitation of this QoS rule. You have to select the data direction of this rule (Upload
of Download), and the speed of bandwidth limitation in Kbps, then select the type of QoS: 'guarantee'
(guaranteed usable bandwidth for this rule) or 'max' (set the maximum bandwidth for the application
allowed by this rule).
Local IP Address: Specify the local (source) IP address that will be affected by this rule. Please input the starting
IP address in the left field, and input the end IP address in the right field to define a range of IP
addresses, or just input the IP address in the left field to define a single IP address.
Local Port Range: Please input the range of local (source) port number that will be affected by this rule. If you want to
apply this rule on port 80 to 90, please input '80-90'; if you want to apply this rule on a single port,
just input the port number, like '80'.
Remote IP
Specify the remote (destination) IP address that will be affected by this rule. Please input the starting
Address:
IP address in the left field, and input the end IP address in the right field to define a range of IP
addresses, or just input the IP address in the left field to define a single IP address.
Remote Port
Please input the range of remote (destination) port number that will be affected by this rule. If you
Range:
want to apply this rule on port 80 to 90, please input '80-90'; if you want to apply this rule on a single
port, just input the port number, like '80'. If the remote (destination) IP address and /or port number is
universal, just leave it blank.
Traffic Type:
Please select the traffic type of this rule, available options are None, SMTP, HTTP, POP3, and FTP. You
can select a specific traffic type for this rule, if you want to make this rule as a IP address based rule
(apply the limitation on all traffics from / to the specified IP address / port number), select 'None'.
Protocol: Please select the protocol type of this rule, available options are TCP and UDP. If you don't know what
protocol your application uses, please try 'TCP' first, and switch to 'UDP' if this rule doesn't seems to work.
After you finish with all settings, please click 'save' button, you'll be brought back to previous menu, and the
rule you just set will appear in current QoS table; if you did anything wrong, you'll get an error message when
you click 'Save' button, please correct your input by the instructions given by the error message.
If you want to erase all values you just entered. Click 'Reset'
YML887
www.netcomm.com.au
NP740N 11n Wireless Router NP740N 11n Wireless Router NP740N 11n Wireless Router