2-2-5 Router IP address lookup
After the IP address setup is complete, please click 'start' -> 'run' at the bottom-lower corner of your desktop:
Input 'cmd', then click 'OK'
Input 'ipconfig', then press 'Enter' key. Please check the IP address followed by 'Default Gateway' (In this
example, the IP address of router is 192.168.1.1, please note that this value may be different.)
NOTE: If the IP address of Gateway is not displayed, or the address followed by 'IP Address' begins with '1', please recheck network
connection between your computer and router, and / or go to the beginning of this chapter, to recheck every step of network setup
procedure.
YML887
www.netcomm.com.au
NP740N 11n Wireless Router
NP740N 11n Wireless Router
NP740N 11n Wireless Router
1