Setup Procedure For 'Static Ip - NetComm NP740n User Manual

2-5-2 Setup procedure for 'Static IP':

Here are descriptions of every setup items:
IP address assigned Please input IP address assigned by your service provider.
by your Service
Provider:
Subnet Mask:
Please input subnet mask assigned by your service provider
Service Provider
Please input the IP address of DNS server provided by your service provider.
Gateway Address:
After you finish with all settings, please click 'Apply' button, and the following message will be displayed on
your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click
'Apply' to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is
rebooting).
If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.
NP740N 11n Wireless Router
0
YML887
www.netcomm.com.au