NTC-40 Default Settings
The following tables list the default settings for the NTC-40 Series.
Logging into the router with the username of root gives extended System options such as the ability to
reboot the router, upgrade the firmware and install extra packages.
NTC-40 –HSPA+ M2M WiFi Router with Voice
10
LAN (MANAGEMENT)
Static IP Address:
Subnet Mask:
Default Gateway:
Table 6 - LAN Management Default Settings
WIRELESS (WIFI)
SSID:
Security:
Security Key:
Table 7 – WiFi Default Settings
For security purposes, it is recommended to change the Default SSID and Wireless Security Key.
NTC-40 WEB INTERFACE ACCESS
Username:
Password:
Table 8 - Web Interface Default Settings
NTC-40 TELNET ACCESS
Username:
Password:
Table 9 - Telnet Access
NTC-40 Series – HSPA+ M2M WiFi Router
192.168.1.1
255.255.255.0
192.168.1.1
NetComm Wireless XXXX where
XXXX are a set of 4 random digits.
WPA2-PSK
Check your Wireless Security Card or
the device label on the bottom of the
NTC-40 for your default SSID and
Security key.
admin /root
admin
root
bovine
YML40V
www.netcommwireless .com