Setup Procedure For 'Pptp - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-5-4 Setup procedure for 'PPTP':

PPTP requires two kinds of setting: WAN interface setting (setup IP address) and PPTP setting (PPTP user

name and password). Here we start from WAN interface setting:

Select the type of how you obtain IP address from your service provider here. You can choose 'Obtain an IP

address automatically' (equal to DHCP, please refer to 'Cable Modem' section above), or 'Use the following IP

address' (i.e. static IP address)

WAN interface settings must be correctly set, or the Internet connection will fail even those settings of PPTP

settings are correct. Please contact your Internet service provider if you don't know what you should fill in

these fields.

NP740N 11n Wireless Router

YML887

www.netcomm.com.au

Table of Contents