Port Forwarding - NetComm NP740n User Manual

3-2-2 Port Forwarding

This function allows you to redirect a single port or consecutive ports of Internet IP address to the same port of the
IP address on local network. The port number(s) of Internet IP address and private IP address (the IP address on
local network) must be the same. If the port number of Internet IP address and private IP address is different, please
use 'Virtual Server' function, described in next section. Please click 'NAT' menu on the left of web management
interface, then click 'Port Forwarding', and the following message will be displayed on your web browser:
Here are descriptions of every setup items:
Enable Port
Check this box to enable port mapping, and uncheck this box to disable port mapping.
Forwarding:
Private IP:
Input the IP address of the computer on local network which provides internet service.
Type:
Select the type of connection, TCP or UDP. If you're not sure, please select 'Both'.
Port Range: Input the starting port number in the left field, and input the ending port number in the right field. If
you only want to redirect a single port number, just fill the port number in the left field.
Comment:
Please input any text to describe this mapping, up to 16 alphanumerical characters.
Add:
Add the mapping to port forwarding table.
Reset: Remove all inputted values.
Port Forwarding Table: All existing port forwarding mappings will be displayed here.
'Delete Selected':
Please select a port forwarding mapping by clicking the 'Select' box of the mapping, then click 'Delete
Selected' button to remove the mapping. If there's no existing mapping, this button will be grayed out.
Delete All: Delete all mappings existed in virtual server table.
Reset:
Unselect all mappings.
After you finish with all settings, please click 'Apply' button, and the following message will be displayed on
your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'
to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.
YML887
www.netcomm.com.au
NP740N 11n Wireless Router NP740N 11n Wireless Router NP740N 11n Wireless Router
1