Dhcp Server - NetComm NP740n User Manual

2-6-2 DHCP Server:

These settings are only available when 'DHCP Server' in 'LAN IP' section is 'Enabled', and here are
descriptions of every setup items:
Lease Time:
Please choose a lease time (the duration that every computer can keep a specific IP address) of every
IP address assigned by this router from dropdown menu.
Start IP:
Please input the start IP address of the IP range.
End IP:
Please input the end IP address of the IP range.
Domain Name: If you wish, you can also optionally input the domain name for your network. This is optional.
Recommended Value if you don't know what to fill:
Lease Time:
Start IP:
End IP:
Domain Name:
NOTE:
1. The number of the last field ('d' field) of the 'End IP' must be greater than 'Start IP', and can not the same with router's IP address.
. The former three fields of IP address of 'Start IP', 'End IP', and 'IP Address of 'LAN IP' section ('a', 'b', and 'c' fields) should be
the same.
. These settings will affect wireless clients too.
NP740N 11n Wireless Router
40
Two Weeks (or 'Forever', if you have less than 20 computers)
192.168.1.2
192.168.1.254
(leave it blank)
YML887
www.netcomm.com.au