Connecting To Wireless Broadband Router By Web Browser; Windows 95/98/Me Ip Address Setup - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-2 Connecting to wireless broadband router by web browser

After the network connection is built, the next step you should do is setup the router with proper network

parameters, so it can work properly in your network environment.

Before you can connect to the router and start configuration procedures, your computer must be able to get

an IP address automatically (use dynamic IP address). If it's set to use static IP address, or you're unsure,

please follow the following instructions to configure your computer to use dynamic IP address:

Click 'Start' button (it should be located at lower-left corner of your computer), then click control panel.

Double-click Network icon, and Network window will appear. Select 'TCP/IP', then click 'Properties'.

Select 'Obtain an IP address from a DHCP server', then click 'OK'.

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents