Setup Procedure For 'Cable Modem; Setup Procedure For 'Fixed-Ip Xdsl - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-3-1 Setup procedure for 'Cable Modem':

Here are descriptions of every setup items:

Host Name:

Please input the host name of your computer, this is optional, and only required if your service provider

asks you to do so.

MAC address:

Please input MAC address of your computer here, if your service provider only permits computer with

certain MAC address to access internet. If you're using the computer which used to connect to Internet

via cable modem, you can simply press 'Clone Mac address' button to fill the MAC address field with the

MAC address of your computer.

After you finish with all settings, please click 'OK' button; if you want to go back to previous menu, click

'Back'.

Here are descriptions of every setup items:

IP address assigned by

your Service Provider:

Subnet Mask:

DNS address:

Service Provider Gateway

Address:

You must use the addresses provided by your Internet service provider, wrong setting value will cause connection problem.

When you finish with all settings, press 'OK' ; if you want to go back to previous menu, click 'Back'.

NOTE: You can choose this Internet connection method if your service provider assigns a fixed IP address (also know as static address)

to you, and not using DHCP or PPPoE protocol. Please contact your service provider for further information.

YML887

www.netcomm.com.au

Please input IP address assigned by your service provider.

Please input subnet mask assigned by your service provider

Please input the IP address of DNS server provided by your service provider.

NP740N 11n Wireless Router

Table of Contents