2-7-1-3 Setup procedure for 'AP Bridge-Point to Multi-Point':
Here are descriptions of every setup items:
Band
Select the band you want to use, two wireless routers must use the same setting.
Channel Number
Select the channel you want to use, two wireless routers must use the same setting.
MAC address
Input the MAC address of other wireless routers.
1 to 4 (4 - 7)
Set Security
Click to set security settings for this connection (Please go to section '2-7-3 Wireless Security' for
detailed instructions).
NP740N 11n Wireless Router
4
YML887
www.netcomm.com.au