Change Management Password - NetComm NP740n User Manual

2-4-2 Change management password

Default password of this router is 'admin', and it's displayed on the login prompt when accessed from web
browser. There's a security risk if you don't change the default password, since everyone can see it. This is very
important when you have wireless function enabled. To change password, please follow the following instructions:
Please click 'System' menu on the left of web management interface, then click 'Password Settings', and the
following message will be displayed on your web browser:
Here are descriptions of every setup items:
Current Password:
New Password:
Confirmed Password:
When you finish, click 'Apply'; If you want to keep original password unchanged, click 'Cancel'. If the
password you typed in 'New Password' and 'Confirmed Password' field are not the same, you'll see the
following message:
Please retype the new password again when you see above message. If you see the following message:
It means the content in 'Current Password' field is wrong, please click 'OK' to go back to previous menu, and
try to input current password again. If the current and new passwords are correctly entered, after you click
'Apply', you'll be prompted to input your new password:
Please use new password to enter web management interface again, and you should be able to login with
new password.
NP740N 11n Wireless Router

Please input current password here.
Please input new password here.
Please input new password here again.
YML887
www.netcomm.com.au