Access Control - NetComm NP740n User Manual

11n wireless broadband router
Hide thumbs Also See for NP740n:
Table of Contents

Advertisement

3-3-1 Access Control

This function allows or denies computers with specific MAC address from connecting to the network; it can
also allow or deny computers with specific IP address, protocol, or port.
Please click 'Firewall' menu on the left of web management interface, then click 'Access Control', and the
following message will be displayed on your web browser:
Here are descriptions of every setup items:
Enable MAC
Check this box to enable MAC address based filtering, and please select 'Deny' or 'Allow' to decide
Filtering:
the behavior of MAC filtering table. If you select deny, all MAC addresses listed in filtering table will be
denied from connecting to the network; if you select allow, only MAC addresses listed in filtering table
will be able to connect to the network, and rejecting all other network devices.
Client PC MAC
Please input the MAC address of computer or network device here, dash ( - ) or colon ( : ) are not
address:
required. (i.e. If the MAC address label of your wireless device indicates 'aa-bb-cc-dd-ee-ff' or 'aa:bb:
cc:dd:ee:ff', just input 'aabbccddeeff'
Comment:
You can input any text here as the comment of this MAC address, like 'ROOM 2A Computer' or
anything. You can input up to 16 alphanumerical characters here. This is optional and you can leave it
blank, however, it's recommended to use this field to write a comment for every MAC addresses as a
memory aid.
Add:
Click 'Add' button to add the MAC address and associated comment to the MAC address filtering table.
Reset:
Remove all inputted values.
MAC Filtering Table:
All existing MAC addresses in filtering table will be listed here.
Delete Selected:
If you want to delete a specific MAC address entry, check the 'select' box of the MAC address you
want to delete, then click 'Delete Selected' button. (You can select more than one MAC addresses).
Delete All:
If you want to delete all MAC addresses listed here, please click 'Delete All' button.
Reset:
You can also click 'Reset' button to unselect all MAC addresses.
NP740N 11n Wireless Router

YML887
www.netcomm.com.au

Advertisement

Table of Contents
loading

Table of Contents