Setup Procedure For 'L2Tp Xdsl - NetComm NP740n User Manual

2-3-5 Setup procedure for 'L2TP xDSL':

L2TP is another popular connection method for xDSL and other Internet connection types, and all required
setting items are the same with PPTP connection.
Like PPTP, there are two kinds of required setting, we'll start from 'WAN Interface Settings':
Please select the type of how you obtain IP address from your service provider here. You can choose 'Obtain
an IP address automatically' (equal to DHCP, please refer to 'Cable Modem' section above), or 'Use the
following IP address' (equal to static IP address, please refer to 'PPPoE xDSL' section above).
WAN interface settings must be correctly set, or the Internet connection will fail even those settings of PPTP
settings are correct. Please contact your Internet service provider if you don't know what you should fill in
these fields.
NP740N 11n Wireless Router

YML887
www.netcomm.com.au