Setup Procedure For 'Dns - NetComm NP740n User Manual

2-5-7 Setup procedure for 'DNS':

If you select 'Dynamic IP' or 'PPPoE' as Internet connection method, at least one DNS server's IP address
should be assigned automatically. However, if you have preferred DNS server, or your service provider didn't
assign the IP address of DNS server because of any reason, you can input the IP address of DNS server here.
Here are descriptions of every setup items:
DNS Address:
Please input the IP address of DNS server provided by your service provider.
Secondary DNS
Please input the IP address of another DNS server provided by your service provider, this is optional.
Address:
NOTE: Only IP address can be entered here; DO NOT use the hostname of DNS server! (i.e. only numeric characters and dots are
accepted)
• 10.0.0.40 – Correct
dns.serviceprovider.com – Incorrect
•
After you finish with all settings, please click 'Apply' button, and the following message will be displayed on
your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click
'Apply' to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is
rebooting).
If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.
NP740N 11n Wireless Router

YML887
www.netcomm.com.au