Port Mapping For Special Applications; Upnp Setting - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

3-2-4 Port Mapping for Special Applications

Some applications require more than one connection a time; these applications won't work with simple NAT

rules. In order to make these applications work, you can use this function to let these applications work.

This function enables network auto-configuration for peer-to-peer communications, with this function, network

devices will be able to communicate with other devices directly, and learn about information about other

devices. Many network device and applications rely on UPnP function nowadays.

Please click 'NAT' menu on the left of web management interface, then click 'UPnP', and the following

message will be displayed on your web browser:

There is only one option in this page, please select 'Enable' or 'Disable' to enable or disable UPnP function,

then click 'Apply' button, and the following message will be displayed on your web browser:

Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'

to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents