NetComm NP740n User Manual page 51

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

Enable 802.1x

Check this box and another sub-menu will appear:

Authentication:

RADIUS Server IP

Please input the IP address of radius server here

address :

RADIUS Server

Please input the port number of radius server here.

Port :

RADIUS Server

Please input the port number of radius password here.

Password :

TIPS: Some examples of WEP key (Don't use those examples; use the one of your own!):

ASCII ( characters):

ASCII (1 characters):

Hex (10 characters):

Hex ( characters):

To improve security level, do not use those words which can be found in a dictionary or too easy to remember! ('pilot' and 'phone' listed

above are bad examples; just intended to show you how a WEP key look like). Wireless clients will remember the WEP key, so you only

have to input the WEP key on wireless client once, and it's worth to use complicated WEP key to improve security level.

After you finish WEP setting, please click 'Apply' button and the following message will be displayed on your

web browser:

Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'

to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).

YML887

www.netcomm.com.au

pilot

phone

digitalFAMILY

8JhxHym&n

87daa7

11dabc8

84bcda847ce0f7abcd84

Hyux

#@xmL

NP740N 11n Wireless Router

Table of Contents