Basic Setup; Time Zone And Time Auto-Synchronization - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-4 Basic Setup

In this chapter, you'll know how to change the time zone, password, and remote management settings. Please

start your web browser and log onto router web management interface, then click 'General Setup' button on

the left, or click 'General Setup' link at the upper-right corner of web management interface.

Please follow the following instructions to set time zone and time auto-synchronization parameters:

Please click 'System' menu on the left of web management interface, then click 'Time Zone', and the

following message will be displayed on your web browser: Please select time zone at 'Set time zone' drop-

down list, and input the IP address or host name of time server. If you want to enable daylight savings setting,

please check 'Enable Function' box, and set the duration of daylight setting. When you finish, click 'Apply'.

You'll see the following message displayed on web browser:

Press 'Continue' to save the settings made and back to web management interface; press 'Apply' to save the

settings made and restart the router so the settings will take effect after it reboots.

NOTE: You can refer to the instructions given in last chapter: 'Using Quick Setup', for detailed descriptions on time zone settings.

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents