Setup Procedure For 'Dynamic Ip - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-5-1 Setup procedure for 'Dynamic IP':

Here are descriptions of every setup items:

Host Name:

Please input host name of your computer, this is optional, and only required if your service provider

asks you to do so.

MAC Address:

Please input MAC address of your computer, if your service provider only permits computer with

certain MAC address to access internet. If you're using the computer which used to connect to

Internet via cable modem, you can simply press 'Clone Mac address' button to fill the MAC address

field with the MAC address of your computer,

After you finish with all settings, please click 'Apply'; if you want to remove and value you entered, please

click 'Cancel'.

After you click 'Apply', the following message will be displayed on your web browser:

Please click 'Continue' to back to previous setup menu; to continue on router setup, or click 'Apply' to reboot

the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents