Setup Procedure For 'Pptp Xdsl - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-3-4 Setup procedure for 'PPTP xDSL':

PPTP xDSL requires two kinds of setting: WAN interface setting (setup IP address) and PPTP setting (PPTP

user name and password). Here we start from WAN interface setting:

Select the type of how you obtain IP address from your service provider here. You can choose 'Obtain an IP

address automatically' (equal to DHCP, please refer to 'Cable Modem' section above), or 'Use the following IP

address' (i.e. static IP address).

WAN interface settings must be correctly set, or the Internet connection will fail even those settings of PPTP

settings are correct. Please contact your Internet service provider if you don't know what you should fill in

these fields.

Now please go to PPTP settings section:

Here are descriptions of every setup items:

User ID:

Please input user ID (user name) assigned by your Internet service provider here.

Password:

Please input the password assigned by your Internet service provider here.

PPTP Gateway:

Please input the IP address of PPTP gateway assigned by your Internet service provider here.

Connection ID:

Please input the connection ID here, this is optional and you can leave it blank.

MTU:

Please input the MTU value of your network connection here. If you don't know, you can use default value.

Connection type:

Please select the connection type of Internet connection you wish to use, please refer to last section for

detailed descriptions.

Idle Time Out:

Please input the idle time out of Internet connection you wish to use, and refer to last section for detailed

descriptions.

Setting item 'BEZEQ-ISRAEL' is only required to check if you're using the service provided by BEZEQ network

in Israel.

When you finish with all settings, please click 'OK ; if you want to go back to previous menu, click 'Back'.

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents