Add Pc - NetComm NP740n User Manual

3-3-1-1 Add PC

After button is clicked, the following message will be displayed on your web browser:
Here are descriptions of every setup items:
Client PC
Please input any text to describe this IP address, up to 16 alphanumerical characters.
Description:
Client PC IP
Please input the starting IP address in the left field, and input the end IP address in the right field to
address:
define a range of IP addresses, or just input the IP address in the left field to define a single IP address.
Client PC Service: Please check all services you want to allow or deny this IP address to use, you can check multiple
services.
Protocol:
If the service you need is not listed above, you can create a new service on your own. Please select
TCP or UDP, if you're not sure, please select 'Both'.
Port Range:
Please input the port range of new service here. If you want to specify port 80 to 90, please input '80-
90'; if you want to apply this rule on a single port, just input the port number, like '80'.
Add: When you finish with all settings, please click 'Add' to save settings, you'll be brought back to previous
menu, and the rule you just set will appear in current IP filtering table.
If you want to remove all settings in this page, click 'Reset' button.
NP740N 11n Wireless Router
8
YML887
www.netcomm.com.au