Setup Procedure For 'Ddns - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

2-5-8 Setup procedure for 'DDNS':

DDNS (Dynamic DNS) is a IP-to-Hostname mapping service for those Internet users who don't have a static

(fixed) IP address. It will be a problem when such user wants to provide services to other users on Internet,

because their IP address will vary every time when connected to Internet, and other user will not be able to

know the IP address they're using at a certain time.

This router supports DDNS service of following service providers:

DynDNS (http://www.dyndns.org)

Please go to one of DDNS service provider's webpage listed above, and get a free DDNS account by the

instructions given on their webpage.

Here are descriptions of every setup items:

Dynamic DNS:

If you want to enable DDNS function, please select 'Enabled'; otherwise please select 'Disabled'.

Provider:

Select your DDNS service provider here.

Domain Name:

Input the domain name you've obtained from DDNS service provider.

Account/E-Mail:

Input account or email of DDNS registration.

Password/Key:

Input DDNS service password or key.

After you finish with all settings, please click 'Apply' button, and the following message will be displayed on

your web browser:

Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click

'Apply' to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.

YML887

www.netcomm.com.au

TZO (http://www.tzo.com)

NP740N 11n Wireless Router

Table of Contents