Virtual Server - NetComm NP740n User Manual

3-2-3 Virtual Server

This function allows you to redirect a port on Internet IP address (on WAN port) to a specified port of an IP
address on local network, so you can setup an Internet service on the computer on local network, without
exposing it on Internet directly. You can also build many sets of port redirection, to provide many different
Internet services on different local computers via a single Internet IP address.
Please click 'NAT' menu on the left of web management interface, then click 'Virtual Server', and the following
message will be displayed on your web browser:
Here are descriptions of every setup items:
Enable Virtual Server: Check this box to enable virtual server, and uncheck this box to disable virtual server.
Private IP:
Input the IP address of the computer which provides Internet service.
Private Port:
Input the port number of the IP address which provides Internet service.
Type:
Select the type of connection, TCP or UDP. If you're not sure, please select 'Both'.
Public Port: Please select the port number of Internet IP address which will be redirected to the port number of
local IP address defined above.
Comment:
Please input any text to describe this mapping, up to 16 alphanumerical characters.
Add: Add the mapping to virtual server table.
Reset: Remove all inputted values.
Virtual Server Table:
All existing virtual server mappings will be displayed here.
Delete Selected:
Please select a virtual server mapping by clicking the 'Select' box of the mapping, then click 'Delete
Selected' button to remove the mapping. If there's no existing mapping, this button will be grayed out.
Delete All:
Delete all mappings existed in virtual server table.
Reset:
Unselect all mappings.
After you finish with all settings, please click 'Apply' button, and the following message will be displayed on
your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'
to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.
NP740N 11n Wireless Router

YML887
www.netcomm.com.au