Dos - Advanced Settings - NetComm NP740n User Manual

11n wireless broadband router

Hide thumbs Also See for NP740n:

Table of Contents

3-3-3-1 DoS - Advanced Settings

When you click 'Advanced' button in DoS menu, the following message will be displayed on your web

browser:

Here are descriptions of every setup items:

Ping of Death:

Set the threshold of when this DoS prevention mechanism will be activated. Please check the box of

Ping of Death, and input the frequency of threshold (how many packets per second, minute, or hour),

you can also input the 'Burst' value, which means when this number of 'Ping of Death' packet is

received in very short time, this DoS prevention mechanism will be activated.

Discard Ping From

Check the box to activate this DoS prevention mechanism.

WAN:

Port Scan:

Many kind of port scan methods are listed here, please check one or more DoS attack methods you

want to prevent.

Sync Flood:

Like Ping of Death, you can set the threshold of when this DoS prevention mechanism will be

activated.

After you finish with all settings, please click 'Apply' button, and the following message will be displayed on

your web browser:

Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'

to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).

If you want to reset all settings in this page back to previously-saved value, please click 'Cancel' button.

YML887

www.netcomm.com.au

NP740N 11n Wireless Router

Table of Contents