Table of Contents
Advertisement
Operator settings
The Operator settings page enables you to select which frequency band you will use for your connection and enables you to scan
for available network operators in your area.
Note: In order to change the operator's band settings, the data connection must be disabled. When you access this page,
you are prompted to disable the data connection if it is already active.
You may want to do this if you're using the router in a country with multiple frequency networks that may not all support High Speed
Packet Access (HSPA). You can select the router to only connect on the network frequencies that suit your requirements.
Use the Change band drop down list to select the band you wish to use.
The following band settings options are available:
It is not necessary to change the default setting of All bands in most cases. In fact, locking to a particular band can cause
connection difficulties if the device is moved to a location where the forced band selection is no longer available.
When All bands is selected, the router attempts to find the most suitable band based on the available networks for the inserted SIM
card.
The GSM All and the WCDMA all options allow you to force the device to lock to either 2G networks only, or 3G networks only.
Click the Save button to save and apply your selection.
www.netcommwireless.com
Ver 1.6
Figure 20 - Band settings
NTC-30WV
WCDMA 900/2100
WCDMA All
GSM ALL
GSM 900/1800
All bands
Table 15 - Band settings
NetComm Wireless NTC-30WV 3G Outdoor Router with Voice
/
29
Advertisement
Table of Contents
