Wi-Fi Protected Access (Wpa) - NetComm NP740n User Manual

2-7-3-3 Wi-Fi Protected Access (WPA):

When you select this mode, the wireless router will use WPA encryption, and the following setup menu will be
shown on your web browser:
Here are descriptions of every setup items:
WPA Unicast Please select a type of WPA cipher suite. Available options are: WPA (TKIP), WPA2 (AES), and WPA2
Cipher Suite:
Mixed. You can select one of them, but you have to make sure your wireless client support the cipher
you selected.
Pre-shared Key Select the type of pre-shared key, you can select Passphrase (8 or more alphanumerical characters,
Format:
up to 63), or Hex (64 characters of 0-9, and a-f).
Pre-shared Key:
Please input the WPA passphrase here. It's not recommended to use a word that can be found in a
dictionary due to security reason.
After you finish WPA Pre-shared key setting, please click 'Apply' button and the following message will be
displayed on your web browser:
Please click 'Continue' to back to previous setup menu; to continue on other setup procedures, or click 'Apply'
to reboot the router so the settings will take effect (Please wait for about 50 seconds while router is rebooting).
NOTE: Some wireless clients (especially those manufactured before year 00) only support WEP or WPA (TKIA) cipher. A driver
upgrade would be needed for those clients to use WPA and WPA encryption.
NP740N 11n Wireless Router

YML887
www.netcomm.com.au