Entering Your Broadband Service Settings; Entering Your Dps Settings; Acn Email Set-Up Guide - NetComm NB16WV Quick Start Manual

Entering your Broadband
Service Settings
After you have factory reset your device you will see the First-Time Set-up
Wizard page. Click on 'Yes, lets get started' to start off the 5-step process.
Step 1: Select your Internet Connection Type
Please enter or select the following settings.
WAN Interface ADSL
WAN type
PPPoE
VPI 8
VcI 35
Username Your MyACN email address you nominated during online sign-up
Password Your MyACN email password you nominated during online sign-up
Click 'Next' for Step 2.
Step 2: Configure your Wireless settings
If you would like to connect devices wirelessly on your network you need to
enable SSID Broadcast.
Enter your preferred Wi-Fi™ network name (this will be the name that is
displayed when you search for Wireless networks on your computer or other
Wi-Fi™ enabled devices). Then click 'Next' for Step 3.
Step 3: Change your Wi-Fi™ Password
To change your Wi-Fi™ password - ACN recommends you select
WPA-PSK / WPA2-PSK as your Security Key type. Enter your preferred
Security Key (password) for your Wireless connection. This will be the
password used to connect Wireless devices to your network. This will replace
the password key on your Wireless security card. If you want to keep the
default password leave the 'desired password' and 'retype password' fields
blank and click on 'Next' to proceed to Step 4.
Step 4: Modem Router Security
This step enables you to change the username and password you use to
access the Netcomm Wireless Wizard. If you wish to change your username
and password we recommend you store this information in a safe location for
future reference. If you do not wish to change this proceed by clicking 'Next'
to Step 5.
18
Step 5: Router Installation is Complete
This step requires you to review the information you have entered
from Steps 1-4. If you are happy with your settings click 'Finish'.
Your Modem Router will reboot and save your ADSL broadband settings.
Once your Modem Router has rebooted, your Internet service should be up
and running.

Entering your DPS Settings

To manually configure your DPS log in to the Netcomm Wireless Wizard.
Select 'Switch to VoIP/NAS View'. Hover over 'SIP Settings' and select
'Service Domain'.
Your SIP settings and service domain can be found at the ACN User Guides
and Manuals section on our website: acnpacific.com.au/user-guides.
Dial a number from your DPS DECT handset to check if the service settings
are working. Your VoIP settings are now provisioned.
Once your DPS is provisioned you can now log into MyAccount to edit your
required DPS phone features.

AcN Email Set-up Guide

Your primary email address will be the email address you requested during
sign-up, e.g. smith@myacn.net.au. This can be found in the confirmation
email we sent you after sign-up.
To access your email:
1. Open your browser and go to mail.myacn.net.au. It is helpful to
bookmark this website for future reference.
2. At the login screen enter your username and password. If your
username is smith@myacn.net.au, you will only be required to
enter "smith".
This will take you to your email account where you will be able to send and
receive emails from your ACN email address.
If you wish to set-up your ACN email in Outlook please refer to our website:
acnpacific.com.au/user-guides.
For all other email clients please refer to GoogleMail Documents for
assistance: mail.google.com/support.
19