Agilent Technologies 86038A User Manual page 82

Making Measurements
Stepped Measurement
82
1 From the Setup menu, press CD/PMD and select GD/CD Stepped.
2 From the Setup menu, press Norm Range. In the Normalization setup panel,
a select Customize
b set the Increment to 2 nm
3 From the Setup menu, press Sens/Res. In the Sens/Res setup panel,
a Select Auto Modulation Frequency
b Select Dynamic Drift Reduction
Dynamic drift reduction should be used when the temperature is gradually
changing. A best practice is to use dynamic drift reduction for all fiber mea
surements.
Agilent 86038A Optical Dispersion Analyzer, Third Edition
Fiber Measurement