Agilent Technologies 86038A User Manual page 2

Notices
© Agilent Technologies, Inc. 2002-2004
This document contains proprietary
information that is protected by
copyright. All rights are reserved.
No part of this document may repro
duced in (including electronic storage
and retrieval or translation into a for
eign language) without prior agree
ment and written consent from Agilent
Technologies GmbH as governed by
United States and international
copyright laws.
Agilent Technologies Deutschland
GmbH
Herrenberger Str. 130
71034 Böblingen
Germany
Manual Part Number
86038-90006
Edition
Third edition, December 2004
Second edition, January 2003
First edition, October 2002
Warranty
This Agilent Technologies instrument
product is warranted against defects in
material and workmanship for a period
of one year from date of shipment.
During the warranty period, Agilent
will, at its option, either repair or
replace products that prove to be
defective.
For warranty service or repair, this
product must be returned to a service
facility designated by Agilent. Buyer
shall prepay shipping charges to
Agilent and Agilent shall pay shipping
charges to return the product to Buyer.
However, Buyer shall pay all shipping
charges, duties, and taxes for products
returned to Agilent from another
country.
Agilent warrants that its software and
firmware designated by Agilent for use
with an instrument will execute its
programming instructions when
properly installed on that instrument.
Agilent does not warrant that the
operation of the instrument, software,
or firmware will be uninterrupted or
error free.
Limitation of Warranty
The foregoing warranty shall not apply
to defects resulting from improper or
inadequate maintenance by Buyer,
Buyer-supplied software or interfacing,
unauthorized modification or misuse,
operation outside of the environmental
specifications for the product, or
improper site preparation or
maintenance.
No other warranty is expressed or
implied. Agilent Technologies
specifically disclaims the implied
warranties of Merchantability and
Fitness for a Particular Purpose.
Exclusive Remedies
The remedies provided herein are
Buyer's sole and exclusive remedies.
Agilent Technologies shall not be liable
for any direct, indirect, special,
incidental, or consequential damages
whether based on contract, tort, or any
other legal theory.
Assistance
Product maintenance agreements and
other customer assistance agreements
are available for Agilent Technologies
products. For any assistance contact
your nearest Agilent Technologies
Sales and Service Office.
Certification
Agilent Technologies Inc. certifies that
this product met its published
specifications at the time of shipment
from the factory.
Agilent Technologies further certifies
that its calibration measurements are
traceable to the United States National
Institute of Standards and Technology,
NIST (formerly the United States
National Bureau of Standards, NBS) to
the extent allowed by the Institutes's
calibration facility, and to the
calibration facilities of other
International Standards Organization
members.
ISO 9001 Certification
Produced to ISO 9001 international
quality system standard as part of our
objective of continually increasing
customer satisfaction through
improved process control.
Safety Notices
CAU T ION
A CAUTION notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per
formed or adhered to, could result
in damage to the product or loss of
important data. Do not proceed
beyond a CAUTION notice until the
indicated conditions are fully
understood and met.
WARN IN G
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated
conditions are fully understood
and met.