Agilent Technologies 86038A User Manual page 145

Recommended Control Sequence
Table 9 ODA Events
Agilent 86038A Optical Dispersion Analyzer, Third Edition
Event
Remoting
SweepProgress
TLSSettlingProbability
TLSSettlingProgress
TriggerProgress
Description
Equivalent Status Property
C# Delegate
This event occurs when the user presses the local key on the ODA
front panel and begins controlling the ODA manually even though
a remote process is connected.
force with
odaClient.Display. T oggleRemoteIndicator
RemotingDelegate
This event occurs when a sweep is begun, when it is complete,
and if it is aborted. The pass parameter indicates which of the
three states occurred.
Use
odaClient.Status. T riggerComplete
SweepProgressDelegate
This event occurs when the ODA queries the latest temperature
reading from the tunable laser. The ODA calculates the estimated
number of minutes until a Laser Settling is required, and reports it
as a pass parameter.
odaClient.Status.EstimatedTimeToTLSSettling
TLSSettlingProbabilityDelegate
This event occurs when the ODA starts, or completes the process
of settling the tunable laser after temperature has drifted. The
ODA will not make measurements while the settling is in
progress.
Status. T LSSettling
ProgressDelegate
This event occurs at the start and finish of most ODA actions such
as sweeping or normalization. The pass parameters indicate what
the current activity is and whether it has started, completed, or
aborted.
Status. T riggerComplete
TriggerProgressDelegate
Remote Operation
to detect end of sweep.
145