Agilent Technologies 86038A User Manual page 288

Specifications and Regulatory Information
Table 19 Optical Fiber Chromatic Dispersion Measurement
Table 20 Power Requirements
Table 21 Environmental Conditions
288
Zero Dispersion Wavelength Accuracy (characteristic)
Zero Dispersion Wavelength Repeatability (characteristic)
Accuracy of dispersion slope at the zero dispersion wavelength
a,e
(characteristic)
Repeatability of dispersion slope at the zero dispersion wavelength
a,e
(characteristic)
a
Measurements performed with Modulation frequency = 2 GHz, IFBW = 30 Hz, stepped mode with 51 phase
samples per trace point, 1 nm wavelength step size, 1515 nm to 1580 nm wavelength range, receiver input
power = –43 dBm at 1550 nm. Normalization performed with Phase Dynamic Accuracy selected and an
Agilent 86122A multi-wavelength meter attached to the system.
b
Based on measurements of NIST Standard Reference Material 2524, Serial No. 0001, using a quadratic fit to
each raw relative group delay trace.
c
Includes the characterization uncertainty of the zero dispersion wavelength as quoted by NIST of
(2 standard deviations).
d
Includes the uncertainty in the temperature measurement used to correct the zero dispersion wavelength of
pm (2 standard deviations).
e
Based on measurements of NIST Standard Reference Material 2524, Serial No. 0001, using a 5-term Sellmeier
fit to each raw group delay trace.
E9247A
Voltage, Frequency
max. Power
83427B
Voltage, Frequency
max. Power
Operating Temperature
Specified Temperature Range
Operating Humidity
Storage Temperature
Storage Humidity
Altitude
a,b,c,d
a,b
100 / 115 V~, 50 / 60 / 400 Hz
230 / 240 V~, 50 / 60 Hz
350 W
115 / 230 V, 50 / 60 Hz
250 VA
+10° C to +35° C
25° C ±5° K
<80% RH
–40° C to +70° C
5% to 95% at +40° C
2000 m maximum (8164B limit)
Agilent 86038A Optical Dispersion Analyzer, Third Edition
Specifications
150 pm
±
9 pm
±
2
25 fs/nm
±
2
3 fs/nm
±
±
60 pm
±
30