Agilent Technologies 86038A User Manual page 194

Programming Commands
NewDataUpdate
(ByVal eLaserMode As enumLaserMode, ByVal eAquisitionMode As
enumAcquisitionMode)
NewStatus
(ByVal Message As String, ByVal MessageType As eEventLogType)
194
Indicates when new measurement data is available. For swept mode
measurements, this event is fired when the sweep is complete. For
stepped mode measurements, a NewDataUpdate event is fired for each
step. This event only gets sent during measurements, normalization and
length measurements. (Not during Optimize Optical Modulator Bias or
Real Time Port Monitor.)
Parameters
eLaserMode - Applies to a stepped or swept mode measurement.
eAcquisitionMode - Indicates data is for a measurement, normalization, or
length measurement.
Related Commands
Actions.Measure method
Actions.Normalize method
Actions.MeasureLength method
Indicates that a new status message is available, which can be displayed
as part of the system status.
Parameters
Message - Message content.
MessageType - Indicates the severity of the message (informational or
error)
Related Command
Status.StatusLog method
Agilent 86038A Optical Dispersion Analyzer, Third Edition
Server to Client Events