Agilent Technologies 86038A User Manual page 109

Measure Menu
Table 6
Operation
Install new SW version
Cycle power/load ODA
application
Preset
Recall State
Normalize with PDA, length,
86122A
Normalize without PDA, with
length and 86122A
Normalize without length, with
PDA and 86122A
Normalize without 86122A, with
PDA and length
Change number of ports
Change swept, stepped, scanned
Change wavelength range
Change RF Mod. Freq.
Change IF bandwidth
TLS Settling
Agilent 86038A Optical Dispersion Analyzer, Third Edition
Clear accesses a panel to clear the normalization data. You can
choose to clear the modulator bias value, phase dynamic accuracy
data, or GD and Gain/Loss offsets.
Cancel aborts the normalization process.
Normalize starts the normalization process.
Close exits the Normalization Viewer.
Optimize Optical Gain/GD
Modulator Normalization
–3.0 V* blank*
last used + last used*
last used last used
recalled recalled
measured measured
last used measured
measured measured
measured measured
last used last used
last used last used +
last used last + extended
ends*
last used + last used *
last used last used +
last used last used +
Length
PDA Normalization
Normalization
blank* blank*
last user* last used +
last used last used
recalled recalled
measured measured
last used + measured
measured last used
measured measured
last used last used
last used last used
last used + last used +
last used * last used
last used last used
last used last used
Function Reference
WL Accuracy
Normalization
blank*
last used +
last used
recalled
measured
measured
measured
last used
last used
last used
last used +
last used
last used
last used +
109