Agilent Technologies 86038A User Manual page 132

Remote Operation
N O TE
N O TE
N O TE
N O TE
N O TE
132
To configure TCP/IP to use DNS or WINS
If using a protocol other than TCP/IP, please contact your IT department
for assistance.
Editing your instrument's protocols and file access permissions can result
in unwanted behaviors that are difficult to reverse. Ensure that your
changes are valid!
Please consult with your network administrator concerning advanced
TCP/IP and multi-protocol configuration settings to support your network.
Please contact your network administrator or IT department if you have
any problems connecting the ODA to your network.
1 On the File menu, click Exit. Enter the password "agilentoda," and then click Yes.
2 Click Start, point to Settings, and then click Network and Dial-up Connections.
3 Right-click the network connection that you want to configure, and then click
Properties.
4 On the General tab (for a local area connection) or the Networking tab (all other
connections), click Internet Protocol (TCP/IP), and then click Properties. From
here, you can make all desired changes.
5 When you have finished making changes, restart the instrument.
For more information, click Start > Help > Index, and search for "DNS" or
"WINS" or "static" or "dynamic."
To configure TCP/IP for static or dynamic addressing
• To get started, follow the same steps listed above.
Recommended Control Sequence
Agilent 86038A Optical Dispersion Analyzer, Third Edition