Diagnostics and troubleshooting
Parameter
Actual diagnostics
Previous diagnostics
96
Parameter overview with brief description
Prerequisite
1 diagnostic event has
occurred.
2 diagnostic events have
already occurred.
12.8
Diagnostic list
In the Diagnostic list submenu, up to 5 currently pending diagnostic events can be
displayed along with the related diagnostic information. If more than 5 diagnostic events
are pending, the events with the highest priority are shown on the display.
Navigation path
Diagnostics menu → Diagnostic list submenu
To call up the measures to rectify a diagnostic event:
• Via Web browser
• Via "FieldCare" operating tool → 90
12.9
Event logbook
12.9.1
Event history
A chronological overview of the event messages that have occurred is provided in the
events list which contains a maximum of 20 message entries. This list can be displayed via
FieldCare if necessary.
Navigation path
Event list: F → Tool box→ Additional functions
For information on the event list, see the FieldCare user interface
This event history includes entries for:
• Diagnostic events → 92
• Information events → 97
In addition to the operation time of its occurrence and possible troubleshooting measures,
each event is also assigned a symbol that indicates whether the event has occurred or is
ended:
• Diagnostic event
•
: Event has occurred
•
: Event has ended
• Information event
: Event has occurred
A chronological overview of the event messages that have occurred is provided in the
Events list submenu.
Description
Displays the current diagnostic
event along with the
diagnostic information.
If two or more messages
occur simultaneously,
the message with the
highest priority is shown
on the display.
Displays the diagnostic event
that occurred prior to the
current diagnostic event along
with the diagnostic
information.
Proline Cubemass C 100 PROFIBUS DP
User interface
Factory setting
Symbol for diagnostic
–
behavior, diagnostic
code and short
message.
Symbol for diagnostic
–
behavior, diagnostic
code and short
message.
Endress+Hauser
Need help?
Do you have a question about the Proline Cubemass C 100 PROFIBUS DP and is the answer not in the manual?