Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual page 100

Diagnostics and troubleshooting
Parameter
Device tag
Serial number
Firmware version
Device name
Order code
Extended order code 1
Extended order code 2
Extended order code 3
ENP version
PROFIBUS ident number
Status PROFIBUS Master Config
IP address
Subnet mask
Default gateway
100
Parameter overview with brief description
Description
Enter the name for the measuring point.
Displays the serial number of the measuring
device.
Displays the device firmware version
installed.
Displays the name of the transmitter.
Displays the device order code.
Displays the 1st part of the extended order
code.
Displays the 2nd part of the extended order
code.
Displays the 3rd part of the extended order
code.
Displays the version of the electronic
nameplate.
Displays the Profibus identification number.
Displays the status of the Profibus Master
configuration.
Displays the IP address of the Web server of
the measuring device.
Displays the subnet mask.
Displays the default gateway.
Proline Cubemass C 100 PROFIBUS DP
User interface
Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /)
Max. 11-digit character string
comprising letters and
numbers.
Character string with the
following format:
xx.yy.zz
Character string composed of
letters, numbers and certain
punctuation marks.
Character string composed of
letters, numbers and certain
punctuation marks
Character string
Character string
Character string
Character string in the format
xx.yy.zz
0 to 65 535
• Active
• Not active
4 octet: 0 to 255 (in the
particular octet)
4 octet: 0 to 255 (in the
particular octet)
4 octet: 0 to 255 (in the
particular octet)
Factory setting
Promass 100 DP
79AFFF16000
01.01
Promass 100 DP
–
–
-
-
2.02.00
5 473
Not active
192.168.1.212
255.255.255.0
0.0.0.0
Endress+Hauser