Calling Up Remedial Measures; Diagnostic Information In Fieldcare; Diagnostic Options - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Diagnostics and troubleshooting
88
12.3.2

Calling up remedial measures

X X X X X X X X X
20.50
X
 16 Message for remedial measures
1 Diagnostic information
2 Short text
3 Service ID
4 Diagnostic behavior with diagnostic code
5 Operation time of occurrence
6 Remedial measures
The user is in the diagnostic message.
1. Press  ( symbol).
 The Diagnostic list submenu opens.
2. Select the desired diagnostic event with  or  and press  .
 The message for the remedial measures for the selected diagnostic event opens.
3. Press  +  simultaneously.
 The message for the remedial measures closes.
The user is in the Diagnostics menu at an entry for a diagnostics event, e.g. in the
Diagnostic list submenu or the Previous diagnostics parameter.
1. Press .
 The message for the remedial measures for the selected diagnostic event opens.
2. Press  +  simultaneously.
 The message for the remedial measures closes.
12.4

Diagnostic information in FieldCare

12.4.1

Diagnostic options

Any faults detected by the measuring device are displayed on the home page of the
operating tool once the connection has been established.
Proline Cubemass C 100 PROFIBUS DP
S
X X X X X X X X
S801
Supply voltage
XX
Diagnostic list
Diagnostics 1
1
S801 Supply voltage
Diagnostics 2
Diagnostics 3
Supply voltage
2
S801 0d00h02m25s
4
Increase supply voltage
6
S
X
Menu
i
S
(ID:203) 3
5
A0013940-EN
Endress+Hauser