Commissioning; Function Check; Connecting Via Fieldcare; Setting The Operating Language - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Commissioning

60
10 Commissioning
10.1

Function check

Before commissioning the measuring device:
‣
Make sure that the post-installation and post-connection checks have been performed.
• "Post-installation check" checklist→  26
• "Post-connection check" checklist→  34
10.2

Connecting via FieldCare

• For FieldCare connection
• For connecting via FieldCare →  48
• For the FieldCare →  49 user interface
10.3

Setting the operating language

Factory setting: English or ordered local language
The operating language can be set in FieldCare, DeviceCare or via the Web server:
Operation → Display language
10.4

Configuring the measuring device

The Setup menu with its submenus contains all the parameters needed for standard
operation.

Setup
Device tag
‣
System units
‣
Medium selection
‣
Communication
‣
Analog inputs
‣
Low flow cut off
‣
Partially filled pipe detection
‣
Advanced setup
Proline Cubemass C 100 PROFIBUS DP
Endress+Hauser
→  61
→  61
→  64
→  65
→  67
→  69
→  70
→  71