Profile Gsd - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Proline Cubemass C 100 PROFIBUS DP
Endress+Hauser
Manufacturer-specific GSD
PROFIBUS DP
The fact that the manufacturer-specific GSD should be used is specified in the Ident
number selector parameter by selecting the Manufacturer option.
Where to acquire the manufacturer-specific GSD:
www.endress.com → Download Area
9.2.2

Profile GSD

Differs in terms of the number of Analog Input blocks (AI) and the measured values. If a
system is configured with a Profile GSD, it is possible to exchange devices made by
different manufacturers. However, it is essential to ensure that the order of the cyclic
process values is correct.
ID number Supported blocks
0x9740 • 1 Analog Input
• 1 Totalizer
0x9741 • 2 Analog Input
• 1 Totalizer
0x9742 • 3 Analog Input
• 1 Totalizer
The Profile GSD that is to be used is specified in the Ident number selector parameter by
selecting the Profile 0x9740 option, Profile 0x9741 option or Profile 0x9742 option.
ID number File name
0x1561 EH3x1561.gsd
Supported channels
• Channel Analog Input: volume flow
• Channel totalizer: volume flow
• Channel Analog Input 1: volume flow
• Channel Analog Input 2: mass flow
• Channel totalizer: volume flow
• Channel Analog Input 1: volume flow
• Channel Analog Input 2: mass flow
• Channel Analog Input 3: corrected volume
flow
• Channel totalizer: volume flow
System integration
51