Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual page 35

Proline Cubemass C 100 PROFIBUS DP
Endress+Hauser
Are all the cable glands installed, firmly tightened and leak-tight? Cable run with "water trap"
→  34?
Depending on the device version: are all the device plugs firmly tightened →  30?
Does the supply voltage match the specifications on the transmitter nameplate →  111?
Is the terminal assignment →  28 or pin assignment of the connector →  29 correct?
If supply voltage is present, is the power LED on the electronics module of the transmitter lit green
→  12?
Depending on the device version, is the securing clamp or fixing screw firmly tightened?
Electrical connection






35