Operation; Reading The Device Locking Status; Adjusting The Operating Language; Reading Measured Values - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Proline Cubemass C 100 PROFIBUS DP
Endress+Hauser
11

Operation

11.1

Reading the device locking status

Device active write protection: Locking status parameter
Navigation
"Operation" menu → Locking status
Function scope of "Locking status" parameter
Options Description
Hardware locked The write protection switch (DIP switch) for hardware locking is activated on the
I/O electronic module. This prevents write access to the parameters .
Temporarily locked Write access to the parameters is temporarily locked on account of internal
processes running in the device (e.g. data upload/download, reset etc.). Once the
internal processing has been completed, the parameters can be changed once
again.
11.2

Adjusting the operating language

Detailed information:
• To configure the operating language →  60
• For information on the operating languages supported by the measuring device
→  123
11.3

Reading measured values

With the Measured values submenu, it is possible to read all the measured values.
Navigation
"Diagnostics" menu → Measured values
‣
Measured values
‣
Process variables
‣
Totalizer 1 to n
11.3.1

"Measured variables" submenu

The Process variables submenu contains all the parameters needed to display the current
measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow
Operation
→  79
→  81
→  80
79