16.13 Application Packages - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Technical data
Heartbeat Technology
Concentration
124
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
• NAMUR NE 105
Specifications for integrating fieldbus devices in engineering tools for field devices
• NAMUR NE 107
Self-monitoring and diagnosis of field devices
• NAMUR NE 131
Requirements for field devices for standard applications
• NAMUR NE 132
Coriolis mass meter

16.13 Application packages

Many different application packages are available to enhance the functionality of the
device. Such packages might be needed to address safety aspects or specific application
requirements.
The application packages can be ordered with the device or subsequently from
Endress+Hauser. Detailed information on the order code in question is available from your
local Endress+Hauser sales center or on the product page of the Endress+Hauser website:
www.endress.com.
Detailed information on the application packages:
Special Documentation for the device →  125
Package Description
Heartbeat Verification Heartbeat Verification
+Monitoring Meets the requirement for traceable verification to DIN ISO 9001:2008 Chapter
7.6 a) "Control of monitoring and measuring equipment".
• Functional testing in the installed state without interrupting the process.
• Traceable verification results on request, including a report.
• Simple testing process via local operation or other operating interfaces.
• Clear measuring point assessment (pass/fail) with high test coverage within the
• Extension of calibration intervals according to operator' s risk assessment.
Heartbeat Monitoring
Continuously supplies data, which are characteristic of the measuring principle, to
an external condition monitoring system for the purpose of preventive
maintenance or process analysis. These data enable the operator to:
• Draw conclusions - using these data and other information - about the impact
• Schedule servicing in time.
• Monitor the process or product quality, e.g. gas pockets.
Package Description
Concentration Calculation and outputting of fluid concentrations
The measured density is converted to the concentration of a substance of a binary
mixture using the "Concentration" application package:
• Choice of predefined fluids (e.g. various sugar solutions, acids, alkalis, salts,
• Common or user-defined units (°Brix, °Plato, % mass, % volume, mol/l etc.) for
• Concentration calculation from user-defined tables.
The measured values are output via the digital and analog outputs of the device.
framework of manufacturer specifications.
process influences (such as corrosion, abrasion, buildup etc.) have on the
measuring performance over time.
ethanol etc.)
standard applications.
Proline Cubemass C 100 PROFIBUS DP
Endress+Hauser