Configuring The Analog Inputs - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Proline Cubemass C 100 PROFIBUS DP
Parameter
Channel
PV filter time
Endress+Hauser
10.4.5

Configuring the analog inputs

The Analog inputs submenu guides the user systematically to the individual Analog input
1 to n submenu. From here you get to the parameters of the individual analog input.
Navigation
"Setup" menu → Analog inputs
‣
Analog inputs
‣
Analog input 1 to n
Parameter overview with brief description
Prerequisite
–
–
Channel
PV filter time
Fail safe type
Fail safe value
Description
Select the process variable.
Specify the time to suppress
signal peaks. During the
specified time the analog input
does not respond to an erratic
increase in the process
variable.
Commissioning
→  67
→  67
→  68
→  68
Selection / User Factory setting
entry
• Mass flow Mass flow
• Volume flow
• Corrected volume
flow
*
• Target mass flow
*
• Carrier mass flow
• Density
• Reference density
*
• Concentration
• Temperature
• Carrier pipe
*
temperature
• Electronic
temperature
• Oscillation
frequency 0
• Oscillation
*
amplitude 0
• Frequency
fluctuation 0
• Oscillation
damping 0
• Tube damping
fluctuation 0
• Signal asymmetry
• Exciter current 0
Positive floating- 0
point number
67