Proline Cubemass C 100 PROFIBUS DP
Endress+Hauser
Problem
No connection via PROFIBUS DP
Not connecting to Web server
Not connecting to Web server
No or incomplete display of
contents in the Web browser
Web browser frozen and operation
no longer possible
Web browser frozen and operation
no longer possible
Content of Web browser
incomplete or difficult to read
Content of Web browser
incomplete or difficult to read
12.2
Diagnostic information via light emitting diodes
12.2.1
Transmitter
Various light emitting diodes (LEDs) on the main electronics module of the transmitter
provide information on device status.
LED
Color
Power
Off
Green
Alarm
Off
Flashing red
Red
Communication
Flashing white
Possible causes
PROFIBUS DP cable incorrectly
terminated
Incorrect setting for the Ethernet
interface of the computer
Web server disabled
• JavaScript not enabled
• JavaScript cannot be enabled
Data transfer active
Connection lost
Not using optimum version of Web
server.
Unsuitable view settings.
Supply voltage is off or too low
Supply voltage is ok
Device status is ok
A device error of diagnostic behavior "Warning" has occurred
• A device error of diagnostic behavior "Alarm" has occurred
• Boot loader is active
PROFIBUS DP communication is active
Diagnostics and troubleshooting
Remedial action
Check terminating resistor .
1. Check the properties of the
Internet protocol (TCP/IP) .
2. Check the network settings with
the IT manager.
Via the "FieldCare" operating tool
check whether the Web server of
the measuring device is enabled
and enable it if necessary → 45.
1. Enable JavaScript.
2. Enter http://XXX.XXX.X.XXX/
basic.html as the IP address.
Wait until data transfer or current
action is finished.
1. Check cable connection and
power supply.
2. Refresh the Web browser and
restart if necessary.
1. Use the correct Web browser
version .
2. Clear the Web browser cache and
restart the Web browser.
Change the font size/display ratio
of the Web browser.
Meaning
85
Need help?
Do you have a question about the Proline Cubemass C 100 PROFIBUS DP and is the answer not in the manual?
Questions and answers