Process - Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual

Proline Cubemass C 100 PROFIBUS DP
Electromagnetic
compatibility (EMC)
Medium temperature range
Density
Pressure-temperature
ratings
Endress+Hauser
• As per IEC/EN 61326 and NAMUR Recommendation 21 (NE 21)
• Complies with emission limits for industry as per EN 55011 (Class A)
• Device version with PROFIBUS DP: Complies with emission limits for industry as per EN
50170 Volume 2, IEC 61784
The following applies for PROFIBUS DP: If baud rates > 1.5 MBaud, an EMC cable
entry must be used and the cable shield must continue as far as the terminal wherever
possible.
Details are provided in the Declaration of Conformity.
16.9

Process

–50 to +205 °C (–58 to +401 °F)
Dependency of ambient temperature on medium temperature
T
a
 18 Exemplary representation, values in the table below.
T Ambient temperature range
a
T Medium temperature
m
A Maximum permitted medium temperature T
require a reduced ambient temperature T
B Maximum permitted ambient temperature T
sensor
Values for devices used in the hazardous area:
Separate Ex documentation (XA) for the device .
Seals
For mounting sets with screwed-on connections:
• Viton: –15 to +200 °C (–5 to +392 °F)
• EPDM: –40 to +160 °C (–40 to +320 °F)
• Silicon: –60 to +200 °C (–76 to +392 °F)
• Kalrez: –20 to +275 °C (–4 to +527 °F)
0 to 5 000 kg/m 3 (0 to 312 lb/cf)
An overview of the pressure-temperature ratings for the process connections is
provided in the "Technical Information" document
A
B
at T = 60 °C (140 °F); higher medium temperatures T
m a max
a
for the maximum specified medium temperature T
a
Technical data
T
m
A0031121
m
of the
m
117